High-pressure hot water extraction that removes what mopping never reaches, embedded grime, black grout, mould, and bacteria from bathroom and kitchen tiles. Bond-ready results your property manager will notice immediately.
- High-pressure machine cleaning, results no mop or scrubber can match
- Results visible immediately, no drying time required
- Fully insured, trained technicians, police-checked and vetted
- Bookable alongside your end-of-lease clean for a single-visit inspection prep
- Fixed prices with no extra fees
Why choose us
Professional tile & grout cleaning that passes Melbourne inspection
Grout discolouration is the one area where DIY cleaning consistently fails at final inspection because standard products cannot reach into the porous structure of grout lines. Our machine-based method physically extracts what surface cleaning leaves behind.
Commercial machine cleaning – not scrubbing
We use a dedicated high-pressure tile and grout cleaning machine that injects hot water under pressure into the tile surface and grout lines, then immediately extracts the dissolved dirt. This process achieves results that no amount of manual scrubbing with retail products can replicate.
Results visible immediately – no drying wait
Unlike carpet cleaning or steam sanitisation, tile and grout cleaning produces results you can see the moment the machine passes over the floor. There is no drying period and no wait before the area can be used, which matters when you have a final inspection coming up quickly.
Honest assessment before the job – no surprises
We inspect the floor before starting, identify any loose tiles or grout, and advise on the expected outcome for heavily stained areas. If black grout has been neglected for years, we tell you what is and isn’t achievable, so there are no unrealistic expectations after the job is done.
Bacteria and mould eliminated – not just hidden
Melbourne bathrooms with inadequate ventilation develop mould in grout lines that staining agents and bleach only partially remove. Our hot water extraction process physically removes the mould and bacteria rather than bleaching over it, the difference is critical for properties with sensitive occupants and visible at inspection.
The process
How our Melbourne tile & grout cleaning service works
Inspect. Treat. Machine clean. Results visible immediately.
1- Book and measure your area
Measure your tiled area (m²) and send it when booking. We provide a fixed quote within 2 hours and confirm it on site before starting.
2- Technician treats and machine cleans
Detergent is applied, grout lines are scrubbed, then hot water extraction removes deep-set dirt and grime.
3- Immediate results – inspection-ready
Excess water is removed, results are visible immediately, and a receipt is provided. No drying time needed.
Service scope
What’s included in every tile & grout clean
Every step below is completed as standard. Grout sealing is the only available add-on, priced and confirmed before the job begins.
- Pre-clean floor inspection – every tiled area inspected for loose tiles, damaged grout and any problem zones before cleaning begins; customer advised of any areas of concern
-
Professional detergent application – purpose-formulated tile and grout detergent applied across the entire surface and allowed to dwell, breaking down embedded grease, mineral deposits and organic soiling
-
Manual agitation of grout lines and problem patches – grout lines and any heavily stained or discoloured areas are agitated by hand with a brush before machine cleaning, a critical step for dark grout and mould
-
High-pressure hot water extraction – the dedicated tile and grout machine passes over the full area, injecting hot water under high pressure and immediately extracting it along with dissolved grime, bacteria and mould
-
Difficult-to-reach areas detailed with wand – corners, behind toilet bases, under vanity edges, and any area the machine cannot access directly are cleaned using a specialist wand attachment
-
Excess water mopped and removed – all residual water from the extraction process is mopped away immediately; the area is usable as soon as the technician finishes
-
Bacteria and mould elimination – hot water at extraction temperature kills bacteria and mould at the source in grout lines, not just bleached over, but physically removed
-
Service receipt issued on the day – the documentation Melbourne property managers request as part of the bond release process, confirming professional cleaning was completed
How to measure your tiled area for a quote?
Measure each tiled room separately and provide the total when requesting a quote. Bathroom, en suite, kitchen and laundry are commonly priced individually.
Room width (m) × Room length (m) = Total m²
Example: 2.5m × 3.0m = 7.5m²
Why it matters
Why professional tile & grout cleaning is critical at end of lease
1- Grout discolouration = instant inspection fail
Dirty or black grout stands out immediately, especially in showers and floors. Our deep cleaning restores grout colour and removes a common cause of bond deductions.
2- Prevents damage and costly regrouting
Built-up grime and moisture lead to cracks and mould over time. Professional cleaning helps avoid damage that could be charged to your bond.
3- Improves presentation for re-letting
Clean tiles make bathrooms and kitchens look well-maintained, improving inspection results and overall property appeal.
When booked as part of our end of lease cleaning Melbourne package, tile and grout cleaning is covered under our full 72-hour bond back guarantee. If your agent identifies a tile or grout concern at final inspection, we return and address it at no additional cost.
Part of your complete vacate clean
Add tile & grout cleaning to your end-of-lease package
Tile and grout cleaning works best when coordinated with your end of lease cleaning Melbourne service. When booked together, our team completes all bathroom, kitchen and floor cleaning in a single visit, no separate tradespeople and no scheduling overlap before your inspection date.
FAQ
Common questions about tile & grout cleaning in Melbourne
In most cases, yes. Our hot water extraction removes built-up grime, soap scum, and mould. Results depend on staining severity and grout condition. If damage is permanent, regrouting may be required.
Pricing is based on square metres. Measure each tiled area (width × length) and provide the total when booking. We confirm a fixed price before starting.
A standard bathroom takes 1–2 hours. Larger or heavily soiled areas take longer. Results are visible immediately with no drying time required.
Yes. Dirty grout, mould, and stained tiles are common reasons for bond deductions. Professional cleaning helps meet inspection standards and provides proof if needed.
Yes, as an add-on. Sealing protects against future stains and mould. We assess suitability on site, as not all tiles can be sealed.
Once a year is recommended. High-traffic areas may need cleaning every 6 months. Regular cleaning prevents deep staining and avoids costly restoration.
Yes, if possible. Clearing the area ensures a full clean. If not, we clean around items and detail edges manually.
Book professional tile & grout cleaning in Melbourne today
Fixed price confirmed before we start. Results visible immediately. Available 7 days a week, with same-day slots for urgent inspection bookings.
